How To Start Recording A Session With F1 Telemetry

Getting started in a new session using our F1 telemetry is incredibly easy. The main thing you have to do, and you only have to do once, is configure your F1 26 in-game telemetry settings.

How to configure your F1 26 telemetry

These need to be set up correctly, pointing at your personal IP address and UDP port. These can be found in your dashboard, or in our F1 overlay app.

Follow the steps below to correctly configure your F1 26 game with our telemetry.

1. Log into our telemetry dashboard to get your unique IP and UDP port. These are displayed at the top of your telemetry dashboard, and in your settings page.
2. Change your in-game telemetry settings from the F1 26 settings screen to match the IP, UDP port and UDP format shown on your telemetry dashboard.
   • Ensure you have telemetry enabled in-game, and the IP, UDP port and format all match.
   • With this configured in-game, your telemetry will be automatically recorded in our F1 telemetry tool, even when our telemetry website is not open.
3. Start any session in F1 26, complete at least one lap. You will then see that lap in our F1 telemetry tool, ready to be analysed.

You can view a full connection and setup guide here.

With your in-game telemetry configured correctly, you are completely set up and ready to start using our F1 telemetry. Head out onto track and put in a few laps, and you should see them in your F1 telemetry dashboard.