How To Connect Telemetry To F1 26

Our F1 telemetry tool imports all of your data from F1 25 and F1 26 in real-time, allowing you to analyse your laps in detail. You can use our telemetry to compare your laps to Pro drivers and see exactly where you are gaining and losing lap time.

Connecting our telemetry to your F1 25 or F1 26 game is super simple, thanks to our telemetry being entirely web-based.

Follow the steps below to connect your F1 game to our telemetry.

1. Log into our telemetry dashboard to get your unique IP and UDP port. These are displayed at the top of your telemetry dashboard, and in your settings page.
2. Change your in-game telemetry settings from the F1 26 settings screen to match the IP, UDP port and UDP format shown on your telemetry dashboard.
   • Ensure you have telemetry enabled in-game, and the IP, UDP port and format all match.
   • With this configured in-game, your telemetry will be automatically recorded in our F1 telemetry tool, even when our telemetry website is not open.
3. Start any session in F1 26, complete at least one lap. You will then see that lap in our F1 telemetry tool, ready to be analysed.

I have completed the steps above, but my telemetry is not showing. Why?

If you have followed the steps above, your telemetry should be shown in our tool. If it is not, I would check the following;

• Check that the IP, UDP port and UDP format all match your dashboard.
  • Check that the UDP format matches your current game. It should be set to 2026 when using the 2026 Season Pack DLC.
• Check your in-game telemetry is enabled.
• Complete at least one lap. Our telemetry does not show laps that are partially completed, and it shows as disconnected when you are in a menu in F1 26.
• Check your firewall is not blocking outgoing traffic to our IP address, or has blocked your game.