F1 2021 Livery Update – Alpine F1 Team Interim Livery Revealed
We finally have a first look at how a 2021 Formula 1 could look. Albeit with a few …
Project Cars 3 Best Logitech G29/G923 FFB Settings
Project Cars 3 has finally landed, and although it isn't the hardcore sim racer that we had hoped for. It is still an enjoyable sim-cade racing game.
In this guide, I will show you the best Logitech G29 force feedback settings for Project Cars 3. These settings can also be used with the Logitech G920, and G923.
Despite not being a true sim racer, you can still have a lot of fun with Project Cars 3, both with a racing wheel and a controller. When racing with a wheel, you have to approach this game a little differently to other hardcore sims. The rear end is likely to snap out under heavy inputs, much like other popular arcade racing games.
Read my full Project Cars 3 review here, to find out whether it is as bad as people are saying.
However, these Logitech G29 / G923 force feedback settings should help you dial in a good feeling with your wheel.
Logitech G923 / G29 / G920 FFB Settings Project Cars 3
- Strength: 85
- Tone: 90
- Vibration: 60
- Steering Deadzone: 0
- Throttle Deadzone: 0
- Throttle Sensitivity: 50
- Brake Dead Zone: 0
- Brake Sensitivity: 50
- Clutch Dead Zone: 5
- Clutch Sensitivity: 50
Logitech G HUB Settings
If you are racing on PC, you can access the Logitech G Hub. Before jumping into Project Cars 3, ensure you have your wheel settings to the below in the G Hub.
<--- Article continues below --->
- Logitech G HUB Operating Range: 900
- Logitech G HUB Sensitivity: 100
- Logitech G HUB Centering Spring Strength: 10
Fancy buying the new Logitech G923 Racing?
If this new racing wheel has taken your fancy, head over to Logitech and pick up your own racing wheel.
I Can’t Get My Logitech G29 / G923 To Work With Project Cars 3 – SOLVED
If you are having problems connecting your G29 to Project Cars 3 on PC, try following the below solution to fix it.
- Ensure you have the Logitech Gaming Software or Logitech G HUB Gaming Software installed on your PC.
- Make sure you have the Logitech G HUB software running in the background before starting Project Cars 3.
- Ensure that you have “Allow Game to Adjust Force Settings” checked under the steering wheel settings in the settings of the Logitech software.
- Try not to use a USB extension cable. Instead connect your wheel directly to the PC with the USB connection supplied by Logitech.
- Try using an alternative USB port.
Grab Your Sim Racing Gear Here
Shop for Fanatec Racing Wheel productsBuy from Fanatec US
Buy from Fanatac Europe
Buy from Fanatac Australia
Shop for Logitech Wheels
Buy from Logitech USA
Buy from Logitech UK & Europe
Shop for Thrustmaster Wheels
Buy from Amazon US
Buy from Amazon UK
Disclaimer: The links above are our affiliate links, and we may receive a small commission from any sales used via these links. Buying after clicking one of our links will never affect the price you pay.
<--- Comment Below --->
Share This Post
You May Also Like These
How To Install an F1 2020 Mod – A Complete Guide To Modding
Modding any game can be a fantastic way to customise and update your gaming experience. When it comes …
How To Get The Aston Martin Racing F1 Livery in F1 2020 Game
In this guide I’ll show you how to get the Aston Martin Racing F1 team livery, logo, suits, …
PC3 wont detect my G29 on PS4, I am pretty mad about this. Anyone know a fix for this? or is it something the developers have messed up?
PS: is runs fine with ACC and GT sport.
I’m in the same boat. Anyone have a fix?
Same here Scott. It works totally fine on PC2, Asetto Corsa, GT Sport. Have you seen any solves?
Mine too I don’t know what’s going on.
Estou com o mesmo problema…meu volante g2o não funciona no project cars³
As far as my research the g29 is not yet compatible with the ps4 version of the game. Codemasters states Its not listed in the compatible wheels for the game….. what a bummer, hooe they fix this fast
Im having the same issue with the g923
I have the issue with my PlayStation 4 and my G29 drives me nuts works on project cars 2 no problem
got the same issue on ps4 with my g29 also.
I’m having the same problem
Same
Same issue here. Pretty bummed after waiting all night for the update to take. Any solutions?
This seems to be a pretty wide spread issue, with people reporting it all over the place. So far there doesn’t seem to be a fix, so I guess we’ll all have to wait for Codemaster or SMS to either drop a patch or release some sort of hotfix.
Yes me too. A lot of us are waiting for the fix. Any help would be appreciated
How do I calibrate the wheel? First I need to turn it full left or right, then to the neutral position and after that 90° to left or right. Is that correct way?
Meu volante é G29.Meu console é o PS4 Pro.Comprei Project Cars 3 no lançamento e já vou me desfazer dele.Puta sacanagem da Produtora, lançae o game, sem disponibilidade paea o G29
Im having the same issue with my Logitech G29 on ps4. Its very frustate you spend on this, have a wheel, Logitech show your logo on the opening screen of the project cars 3 and the G wheels its NOT WORKING… this is to be considerer High priority to launch a upgrade soon as possible.
As far as my research the g29 is not yet compatible with the ps4 version of the game. Codemasters states Its not listed in the compatible wheels for the game….. what a bummer, hooe they fix this fast
Hey, there’s a little switch on top of the steering wheel for PS3 vs PS4/PC. Did you try flipping it and trying again?
You probably did, but worth a shot if you haven’t.